Grade library
Grade library
Common ABS, PP, PE and PS grades in one table. Filter by material, producer or grade type, or type a grade, producer or application straight into the search box. Data sheets, test reports and compliance documents are available from our sales team.
Materials
Five material families, each with its own trade-offs
A short note on where each family sits and what it is used for. The families with published grades are collected in the table below.
ABS resin
ABS is a terpolymer of acrylonitrile, butadiene and styrene. It balances rigidity, impact strength and surface gloss, processes over a wide window and takes secondary operations well, which makes it suitable for small and mid-size structural and cosmetic parts. Yilong holds general-purpose injection, high-impact and heat-resistant grades covering the mainstream requirements of appliance, automotive and electrical customers.
PP Polypropylene
Polypropylene is one of the highest-volume commodity plastics. It is supplied in three structures: homopolymer, which gives stiffness and heat resistance at low cost; random copolymer, where ethylene units improve clarity; and impact copolymer, which disperses an EPR phase through the matrix to add low-temperature toughness without giving up rigidity. PP has low density, good chemical resistance and a wide processing window, which suits high-volume structural parts, containers and housewares with stable supply and cost.
PE Polyethylene
Polyethylene is classed by density and structure into HDPE, LDPE and LLDPE. HDPE is stiff and pressure resistant, which suits blow-moulded containers, closures and pipe; LDPE is soft and clear and goes mainly into film, shrink film and laminate substrates; LLDPE resists tearing and puncture better and is the usual choice for packaging and agricultural film. PE is tough, does not embrittle at low temperature and resists chemicals well, with the best processing behaviour and recycling compatibility of the commodity plastics — the base material of the packaging and houseware industries.
Polystyrene (GPPS and HIPS)
PS is polystyrene, supplied as general-purpose GPPS and high-impact HIPS. GPPS is clear, stiff and easy to colour, but noticeably brittle; HIPS carries a rubber phase, which lifts impact strength considerably and gives a white or natural appearance suited to housings and structural parts. Both flow well, shrink predictably and process over a wide window, which is why they rank among the higher-volume commodity plastics in appliance, packaging and houseware production.
Colour and functional masterbatch
Masterbatch is a pellet in which pigment or additive is dispersed at high concentration in a resin carrier. It is blended with the base resin at a set let-down ratio to give even colour or a functional effect. Against loose pigment powder it disperses more evenly, puts less dust into the plant and holds the addition ratio steady, which suits volume injection moulding and extrusion. Yilong supplies white, black and colour masterbatch, plus antistatic, flame retardant, filler, impact modifier and slip grades, made to your colour reference and end use.
← Swipe to see all columns →
| Material | Grade | Producer | Grade type | Key features | Typical applications |
|---|---|---|---|---|---|
| ABS resin | 121H | LG Chem (Huizhou · Ningbo) | High flow | High flow, good surface gloss | Appliance housings, housewares, toys |
| ABS resin | HI-121 | LG Chem (Huizhou · Ningbo) | High impact | Balanced impact and flow, widely applicable | Appliance structural parts, power tool housings |
| ABS resin | HI-121H | LG Chem (Huizhou · Ningbo) | High impact | Medium-high impact, stable moulding | Appliance panels, thin-wall housings |
| ABS resin | HI-100 | LG Chem (Huizhou · Ningbo) | General purpose | General injection grade, balanced properties | Appliance and electronics housings |
| ABS resin | AF-312A | LG Chem (Huizhou · Ningbo) | Flame retardant | Flame-retardant compound for electrical safety | Power supply housings, switches and electrical parts |
| ABS resin | TR-551 | LG Chem (Huizhou · Ningbo) | Heat resistant | Improved heat resistance | Automotive interiors, parts near heat sources |
| ABS resin | GP-22 | INEOS Styrolution (Korea) | General purpose | High flow, high gloss, widely applicable | Appliance housings, electronics, toys, medical items |
| ABS resin | GP-35 | INEOS Styrolution (Korea) | High flow | White base colour, high flow, tough and light | Large appliance housings, bulky parts |
| ABS resin | HI-10 | INEOS Styrolution (Europe) | High impact | High impact, outstanding toughness | Automotive interiors, structural parts, toolboxes |
| ABS resin | Novodur P2H-AT | INEOS Styrolution (Europe) | High impact | High-impact injection moulding grade | Automotive interiors, appliance structural parts |
| ABS resin | Terluran ECO GP-22 MR70 | INEOS Styrolution (Europe) | General purpose | ECO grade with 70% recycled content | Non-cosmetic parts, consumer goods |
| ABS resin | MG47F | SABIC (Tianjin) | General purpose | High flow, easy to mould | Appliance and electronics housings, office equipment |
| ABS resin | CYCOLAC MG47 | SABIC (Tianjin) | General purpose | General injection grade, stable processing | Appliance housings, housewares |
| ABS resin | CYCOLAC MG94U | SABIC (Tianjin) | High impact | Balanced impact and flow | Automotive interiors, appliance structural parts |
| ABS resin | CYCOLAC MGABS01 | SABIC (Tianjin) | Platable | Designed for plating, strong adhesion of the plated layer | Plated cosmetic parts for sanitary ware and automotive |
| ABS resin | CYCOLAC EX39 | SABIC (Tianjin) | Extrusion | Extrusion grade, good toughness | Sheet, panel and thermoformed parts |
| ABS resin | F332 | Shandong Eastech Chemical | General purpose | Balanced general injection grade | Appliance and electronics housings |
| ABS resin | L322 | Shandong Eastech Chemical | High flow | High flow, high gloss | Thin-wall appliance parts, housewares |
| ABS resin | C442 | Shandong Eastech Chemical | Heat resistant | Medium-high heat resistance, injection and extrusion | Automotive interiors, electrical parts |
| ABS resin | B432/E | Shandong Eastech Chemical | Extrusion | Extrusion grade | Sheet and panel |
| ABS resin | 1725 | Guangxi Changke New Materials | General purpose | Bulk-process general injection grade | Appliance housings, housewares |
| ABS resin | CT2010 | Guangxi Changke New Materials | Transparent | Transparent ABS (MABS) | Clear cosmetic parts, appliance panels |
| ABS resin | A-2020 | Yulong Petrochemical | General purpose | General injection grade | Appliance housings, housewares |
| ABS resin | A-2021 | Yulong Petrochemical | High impact | Improved impact strength | Appliance structural parts, automotive interiors |
| ABS resin | ZA0210 | Zhejiang Petrochemical | General purpose | General injection grade, stable processing | Appliance and houseware housings |
| ABS resin | ZA0211 | Zhejiang Petrochemical | High impact | Improved impact strength | Appliance structural parts, automotive interiors |
| PP Polypropylene | M1600 | LG Chem (Huizhou · Ningbo) | General purpose | Homopolymer injection grade, good stiffness | Appliance internals, housewares |
| PP Polypropylene | M1700 | LG Chem (Huizhou · Ningbo) | High flow | High-flow homopolymer | Thin-wall mouldings, strapping |
| PP Polypropylene | H7700 | LG Chem (Huizhou · Ningbo) | High impact | Impact copolymer, good toughness | Crates, automotive parts |
| PP Polypropylene | H7900 | LG Chem (Huizhou · Ningbo) | High impact | High-impact copolymer | Washing machine tubs, automotive parts |
| PP Polypropylene | R3400 | LG Chem (Huizhou · Ningbo) | Transparent | Random copolymer, good clarity | Clear containers, food and medical packaging |
| PP Polypropylene | MH7700 | LG Chem (Huizhou · Ningbo) | Metallocene | Metallocene impact copolymer | High-toughness structural parts |
| PP Polypropylene | 500P | SABIC (Tianjin) | General purpose | Homopolymer injection grade, good stiffness | Appliance internals, housewares |
| PP Polypropylene | 511MK40T | SABIC (Tianjin) | High impact | Impact copolymer injection grade | Automotive and appliance structural parts |
| PP Polypropylene | 87MK40T | SABIC (Tianjin) | High impact | Medium-melt impact copolymer | Crates, automotive parts |
| PP Polypropylene | 57MNK40 | SABIC (Tianjin) | High impact | Random and impact copolymer | Low-temperature structural parts |
| PP Polypropylene | 56M65 | SABIC (Tianjin) | High flow | High flow, fast cycling | Thin-wall parts, packaging |
| PP Polypropylene | 76M10 | SABIC (Tianjin) | General purpose | Homopolymer injection grade | Housewares, small appliances |
| PP Polypropylene | HJ730 | Hanwha TotalEnergies | General purpose | High-stiffness homopolymer injection grade | Appliance internals, electronic parts |
| PP Polypropylene | HJ730L | Hanwha TotalEnergies | High flow | High stiffness and high flow | Thin-wall appliance parts |
| PP Polypropylene | BJ550 | Hanwha TotalEnergies | High impact | Block copolymer, good impact strength | Crates, automotive parts |
| PP Polypropylene | RJ570Z | Hanwha TotalEnergies | Transparent | Clear random copolymer | Clear containers, food and medical packaging |
| PP Polypropylene | TF400 | Hanwha TotalEnergies | Film | Cast film grade | Cast film, laminating packaging film |
| PP Polypropylene | T30S | Yulong Petrochemical | Raffia | Homopolymer raffia grade, high strength | Woven bags, strapping |
| PP Polypropylene | 1100N | Yulong Petrochemical | General purpose | Homopolymer injection grade | Housewares, small appliances |
| PP Polypropylene | K8009 | Yulong Petrochemical | High impact | Impact copolymer, balanced stiffness and toughness | Automotive and appliance structural parts |
| PP Polypropylene | K7726 | Yulong Petrochemical | High impact | High-impact copolymer | Crates, automotive parts |
| PP Polypropylene | PP-RP340R | Yulong Petrochemical | Transparent | Clear random copolymer | Clear containers and packaging |
| PP Polypropylene | S1003 | Zhejiang Petrochemical | Raffia | Homopolymer raffia grade | Woven bags, strapping |
| PP Polypropylene | HP500N | Zhejiang Petrochemical | General purpose | Homopolymer injection grade | Housewares, appliance internals |
| PP Polypropylene | K8003 | Zhejiang Petrochemical | High impact | Impact copolymer, balanced stiffness and toughness | Automotive and appliance structural parts |
| PP Polypropylene | K8009 | Zhejiang Petrochemical | High impact | Low and medium melt impact copolymer | Crates, automotive parts |
| PP Polypropylene | K4912 | Zhejiang Petrochemical | Transparent | Clear random copolymer | Clear packaging and containers |
| PP Polypropylene | M800E | Chambroad Petrochemical | Transparent | Clear grade balancing stiffness and clarity | Clear containers, packaging |
| PP Polypropylene | RP340R | Chambroad Petrochemical | Transparent | Clear random copolymer | Clear packaging, medical disposables |
| PP Polypropylene | K9930H | Chambroad Petrochemical | High impact | High-melt impact copolymer | Thin-wall and large structural parts |
| PP Polypropylene | EP548R | Chambroad Petrochemical | High impact | Impact copolymer | Automotive and appliance structural parts |
| PP Polypropylene | F800E | Chambroad Petrochemical | Film | Cast film grade | Cast film, laminating packaging |
| PP Polypropylene | PA14D | Chambroad Petrochemical | Pipe | PPR pipe compound | Hot and cold water pipe |
| PP Polypropylene | H6500 | Zhejiang Hongji Petrochemical | High flow | Thin-wall homopolymer with high flow | Thin-wall food containers, housewares |
| PP Polypropylene | 3080T | Zhejiang Hongji Petrochemical | General purpose | General injection grade | Housewares, small appliance parts |
| PP Polypropylene | R4160T | Zhejiang Hongji Petrochemical | Transparent | Clear random copolymer | Clear packaging and containers |
| PP Polypropylene | M4160T | Zhejiang Hongji Petrochemical | Transparent | Clear high-flow random copolymer | Thin-wall clear parts |
| PP Polypropylene | HP500N | LyondellBasell | General purpose | Homopolymer injection grade, high stiffness, low odour | Food containers, housewares, toys, closures |
| PP Polypropylene | HP552R | LyondellBasell | Fiber | Homopolymer extrusion grade, anti-yellowing additive system | Spunbond nonwoven, carpet yarn, rope and netting |
| PP Polypropylene | HP550J | LyondellBasell | Raffia | Homopolymer raffia grade, stable drawing | Woven bag tape, yarn |
| PP Polypropylene | HP461Y | LyondellBasell | Fiber | For meltblown, ultra-narrow molecular weight distribution | Meltblown nonwoven, face masks and filtration media |
| PP Polypropylene | HP648T | LyondellBasell | High flow | Thin-wall injection, nucleated and antistatic | Thin-wall food containers, disposable tableware |
| PP Polypropylene | EP300M | LyondellBasell | High impact | Balanced stiffness and toughness, low warpage | Rigid packaging, housewares, crates |
| PP Polypropylene | EP300R | LyondellBasell | High impact | Good low-temperature impact and flow | Washing machine tubs, electrical parts, opaque containers |
| PP Polypropylene | EP500N | LyondellBasell | High impact | Low warpage, high low-temperature impact | Crates, pails, electrical parts |
| PP Polypropylene | EP548R | LyondellBasell | High impact | Thin-wall injection, high flow | Thin-wall food packaging, microwave containers |
| PP Polypropylene | EP548U | LyondellBasell | High impact | Ultra-high flow, nucleated and antistatic | Thin-wall containers, yoghurt cups, toys |
| PP Polypropylene | EP440G | LyondellBasell | Extrusion | High melt strength, low-temperature impact | Sheet, profiles, blow-moulded pails |
| PP Polypropylene | RP344NK | LyondellBasell | Transparent | Random copolymer, nucleated and highly clear | Clear containers, housewares, bottles and closures |
| PP Polypropylene | HP500N B | BLYB (Panjin, Liaoning) | General purpose | Homopolymer injection grade for consumer goods | Housewares, toys, food packaging |
| PP Polypropylene | HP550J B | BLYB (Panjin, Liaoning) | Raffia | Homopolymer raffia grade | Woven bag tape, yarn, monofilament |
| PP Polypropylene | HP648U B | BLYB (Panjin, Liaoning) | High flow | Thin-wall injection | Milk tea cups, food containers |
| PP Polypropylene | EP300M B | BLYB (Panjin, Liaoning) | High impact | Balanced stiffness and toughness | Rigid packaging, housewares |
| PP Polypropylene | EP300H B | BLYB (Panjin, Liaoning) | High impact | Sheet and profile thermoforming | Corrugated board, crates, industrial bottles |
| PP Polypropylene | EP300R B | BLYB (Panjin, Liaoning) | High impact | Low-temperature impact, good flow | Housewares, opaque containers |
| PP Polypropylene | EP448R B | BLYB (Panjin, Liaoning) | High impact | Impact copolymer injection grade | Housewares, toys |
| PP Polypropylene | EP648U B | BLYB (Panjin, Liaoning) | High impact | For rigid parts | Furniture parts, rigid components |
| PP Polypropylene | Hifax SP179N B | BLYB (Panjin, Liaoning) | High impact | Modified impact copolymer | Automotive exterior trim, automotive parts |
| PP Polypropylene | RP344NX B | BLYB (Panjin, Liaoning) | Transparent | Random copolymer for closures | Bottles, closures, cleaning product containers |
| PP Polypropylene | RP348RX B | BLYB (Panjin, Liaoning) | Transparent | Random copolymer, rigid packaging | Rigid packaging, housewares |
| PP Polypropylene | RP215MX B | BLYB (Panjin, Liaoning) | Film | Random copolymer for film extrusion | CPP food film, tissue film, retort film |
| PE Polyethylene | ME2500 | LG Chem (Huizhou · Ningbo) | Injection | HDPE injection grade, high stiffness | Crates, closures |
| PE Polyethylene | ME8000 | LG Chem (Huizhou · Ningbo) | Injection | HDPE injection grade, good impact strength | Crates, housewares |
| PE Polyethylene | BB120 | LG Chem (Huizhou · Ningbo) | Blow molding | HDPE blow moulding grade, ESCR | Hollow containers, chemical drums |
| PE Polyethylene | XL1800 | LG Chem (Huizhou · Ningbo) | Pipe | HDPE pipe compound, pressure resistant | Water supply and gas pipe |
| PE Polyethylene | EA28025 | LG Chem (Huizhou · Ningbo) | Film | LDPE film grade, good clarity | Packaging film, agricultural film |
| PE Polyethylene | B4660 | SABIC (Tianjin) | Blow molding | HDPE blow moulding grade, good stiffness | Hollow containers, bottles |
| PE Polyethylene | M200056 | SABIC (Tianjin) | Injection | HDPE injection grade | Crates, housewares |
| PE Polyethylene | M40053S | SABIC (Tianjin) | Injection | HDPE injection grade, good impact strength | Crates, closures |
| PE Polyethylene | 218WJ | SABIC (Tianjin) | Film | LLDPE film grade with slip and antiblock | Packaging film, laminating film |
| PE Polyethylene | 118WJ | SABIC (Tianjin) | Film | LLDPE film grade | Packaging film, mulching film |
| PE Polyethylene | 2102X0 | SABIC (Tianjin) | Film | LDPE film grade | Packaging film, agricultural film |
| PE Polyethylene | F110A | Hanwha TotalEnergies | Film | HDPE film grade | Packaging film, shopping bags |
| PE Polyethylene | J441A | Hanwha TotalEnergies | Injection | HDPE injection grade | Crates, housewares |
| PE Polyethylene | J810A | Hanwha TotalEnergies | Injection | HDPE injection grade, high stiffness | Closures, small parts |
| PE Polyethylene | P300A | Hanwha TotalEnergies | Pipe | HDPE pipe compound | Water supply and drainage pipe |
| PE Polyethylene | R901U | Hanwha TotalEnergies | Film | LLDPE film grade | Packaging film, laminating film |
| PE Polyethylene | 431G | Hanwha TotalEnergies | Film | LDPE film grade | Packaging film, agricultural film |
| PE Polyethylene | HD-5000S | Yulong Petrochemical | Raffia | HDPE raffia grade | Rope, netting and monofilament |
| PE Polyethylene | 5502S | Yulong Petrochemical | Blow molding | HDPE small hollow grade, good impact strength | Personal care and cosmetic bottles |
| PE Polyethylene | LLD-7042 | Yulong Petrochemical | Film | LLDPE film grade | Packaging film, mulching film |
| PE Polyethylene | HD-7000F | Yulong Petrochemical | Film | HDPE film grade | Packaging film, shopping bags |
| PE Polyethylene | 5502 | Zhejiang Petrochemical | Blow molding | HDPE small hollow grade | Personal care bottles, hollow containers |
| PE Polyethylene | 9255 | Zhejiang Petrochemical | Film | HDPE film grade | Packaging film |
| PE Polyethylene | 7750 | Zhejiang Petrochemical | Raffia | HDPE raffia grade | Rope, netting and monofilament |
| PE Polyethylene | 7260K | Zhejiang Petrochemical | Injection | HDPE injection grade | Crates, housewares |
| PE Polyethylene | 23050 | Zhejiang Petrochemical | Pipe | PE100 pipe compound | Water supply and gas pipe |
| PE Polyethylene | DFDA-7042 | Zhejiang Petrochemical | Film | LLDPE film grade | Packaging film, mulching film |
| PE Polyethylene | 2426K | Zhejiang Petrochemical | Film | LDPE film grade | Packaging film, agricultural film |
| PE Polyethylene | FS7000 | Lianyungang Satellite Petrochemical | Film | HDPE film grade (range to be completed) | Packaging film |
| PE Polyethylene | Hostalen ACP 5831 D | LyondellBasell | Blow molding | HDPE small hollow grade, balanced stiffness and ESCR | Personal care and skincare bottles, small and mid-size food pails |
| PE Polyethylene | Hostalen ACP 6541A | LyondellBasell | Injection | HDPE grade for closures, high stiffness | Beverage and mineral water closures, pharmaceutical caps, tube shoulders |
| PE Polyethylene | Hostalen GC 7260 | LyondellBasell | Injection | General HDPE injection grade, good flow, low warpage | Closures, toys, housewares, crates |
| PE Polyethylene | Hostalen ACP 9254 Plus | LyondellBasell | Film | Bimodal HDPE blown film, high stiffness, low gels | Heavy-duty packaging film, carrier bags, courier bags, stretch film |
| PE Polyethylene | Hostalen CRP 100 | LyondellBasell | Pipe | PE100 pipe compound, slow crack growth resistant | Pressure pipe and fittings for water and gas |
| PE Polyethylene | Hostalen 4731B | LyondellBasell | Pipe | PE-RT II pipe compound, high long-term hydrostatic strength | Underfloor heating pipe, hot and cold water pipe, composite pipe |
| PE Polyethylene | Hostalen ACP 5331 A | LyondellBasell | Blow molding | HDPE blow moulding, balanced stiffness and ESCR | Chemical drums, 1–60 L stacked pails |
| PE Polyethylene | Lupolen 2426H | LyondellBasell | Film | LDPE blown film with slip and antiblock | Food packaging film, shrink film, medical film |
| PE Polyethylene | Lupolen 2420F | LyondellBasell | Film | LDPE blown film, good optics and drawdown | General food packaging film, laminate inner layer |
| PE Polyethylene | Hostalen GC 7260 B | BLYB (Panjin, Liaoning) | Injection | General HDPE injection grade | Crates, housewares, toys |
| PE Polyethylene | Hostalen ACP 5831D B | BLYB (Panjin, Liaoning) | Blow molding | HDPE small hollow grade | Stationery, toys, consumer packaging |
| PE Polyethylene | Hostalen ACP 9255 B | BLYB (Panjin, Liaoning) | Film | HDPE blown film | Carrier bags, courier bags, stretch film |
| PE Polyethylene | Hostalen 23050 B | BLYB (Panjin, Liaoning) | Extrusion | HDPE extrusion, creep resistant, high ESCR｜non-pressure pipe by the producer's own description | Non-pressure pipe, fittings, extruded profiles |
| PE Polyethylene | Hostalen ACP 9541A B | BLYB (Panjin, Liaoning) | Blow molding | General HDPE hollow grade | Drums, industrial packaging, stacked pails |
| PE Polyethylene | Hostalen ACP 5331 A B | BLYB (Panjin, Liaoning) | Blow molding | General HDPE hollow grade | Large stacked pails, 1–60 L pails |
| PE Polyethylene | DFDA-7042 | BLYB (Panjin, Liaoning) | Film | LLDPE film grade | Packaging film, agricultural film, mulching film |
| PE Polyethylene | DFDC-7050 | BLYB (Panjin, Liaoning) | Film | LLDPE film grade | Packaging film, agricultural film, mulching film |
| PE Polyethylene | DNDA-8320 | BLYB (Panjin, Liaoning) | Injection | LLDPE injection grade | Housewares, cable compound, masterbatch carrier |
| Polystyrene (GPPS and HIPS) | Styrolution PS 158K | INEOS Styrolution (Europe) | General purpose | General-purpose GPPS injection grade | Housewares, packaging, clear appliance parts |
| Polystyrene (GPPS and HIPS) | Styrolution PS 168N | INEOS Styrolution (Europe) | Heat resistant | High-molecular-weight GPPS for heat-resistant extrusion | Sheet, foam and heat-resistant parts |
| Polystyrene (GPPS and HIPS) | Styrolution PS 454N | INEOS Styrolution (Europe) | High impact | High-gloss high-impact HIPS | Appliance housings, electronics enclosures |
| Polystyrene (GPPS and HIPS) | Styrolution PS 476L | INEOS Styrolution (Europe) | High impact | High-impact HIPS | Appliance liners, packaging |
| Polystyrene (GPPS and HIPS) | Styrolution PS 485N | INEOS Styrolution (Europe) | High impact | High-impact HIPS | Refrigerator liners, appliance parts |
| Polystyrene (GPPS and HIPS) | GPPS 15NF | LG Chem (Huizhou · Ningbo) | General purpose | General-purpose GPPS injection grade, good clarity | Clear housewares, packaging |
| Polystyrene (GPPS and HIPS) | GPPS 25SP | LG Chem (Huizhou · Ningbo) | General purpose | High-flow GPPS | Thin-wall clear parts, packaging |
| Polystyrene (GPPS and HIPS) | HIPS 60HR | LG Chem (Huizhou · Ningbo) | High impact | Heat-resistant impact HIPS | Appliance liners, electrical parts |
| Polystyrene (GPPS and HIPS) | HIPS 501S-S | LG Chem (Huizhou · Ningbo) | High impact | High-impact HIPS | Refrigerator liners, packaging |
| Polystyrene (GPPS and HIPS) | HIPS 40AF | LG Chem (Huizhou · Ningbo) | Flame retardant | Flame-retardant HIPS | Electrical enclosures, power supply parts |
| Polystyrene (GPPS and HIPS) | RG-535N | Huizhou Renxin Petrochemical | General purpose | General-purpose GPPS injection grade | Clear housewares, packaging |
| Polystyrene (GPPS and HIPS) | RG-535HN | Huizhou Renxin Petrochemical | General purpose | GPPS for refrigerator liners | Refrigerator liners and clear parts |
| Polystyrene (GPPS and HIPS) | RG-535TK | Huizhou Renxin Petrochemical | Heat resistant | High-heat GPPS for light guide plates | Light guide plates, lighting parts |
| Polystyrene (GPPS and HIPS) | RH-825G | Huizhou Renxin Petrochemical | High impact | High-gloss HIPS | Appliance housings, electronics enclosures |
| Polystyrene (GPPS and HIPS) | RH-666G | Huizhou Renxin Petrochemical | High impact | High-gloss HIPS | Appliance housings, packaging |
No grades match — try another keyword, or reset the filters.
Grades are taken from producers' published information as a reference for selection talks. No physical property values are listed here; data sheets and test reports are available from our sales team, and supply, price and lead time are confirmed on enquiry. BLYB is a 50:50 joint venture between LyondellBasell and Liaoning Jincheng Petrochemical in Panjin, Liaoning (production started in 2020); its three polyolefin plants run the LYB-licensed process and the Moplen / Hostalen brands, and a trailing “B” in a grade name marks BLYB production.
Engineering materials
Engineering material pages
Beyond ABS, PP, PE and PS: heat-resistant and precision-tolerance materials. PEEK, PPA and POM each have their own page covering properties, series and processing.
The high-performance plastic at the top of the pyramid
PEEKPolyetheretherketone · Fengmei Pimeike
View →High-temperature nylon for hot, humid operating conditions
PPAPolyphthalamide · BASF Ultramid® Advanced
View →The standard material for precision drives and sliding parts
POMPolyoxymethylene · BASF Ultraform®
View →Applications
Browse by industry
Selection priorities and compliance requirements for each industry are set out in Industries.
Can't find the grade you need?
Send the grade, colour and monthly volume and we will come back with price, stock position and lead time; grades outside the table are welcome too.